Section: 29.6 Practical Assessment Job Reports and Help | EAL Level 3 QET3/029 Maintenance of mechanical systems 23-24

Section: 29.6 Practical Assessment Job Reports and Help | EAL Level 3 QET3/029 Maintenance of mechanical systems 23-24 | Grŵp NPTC Group Moodle

Main course page

GENERAL COURSE INFORMATION

Here you will find documents and information regarding the course overall.
- QET3/029 Maintenance of Mechanical Systems
  
  This section contains useful information for the unit and covers six learning outcomes:
  
  LO 1 Understand the maintenance function
  LO 2 Understand lubricants and lubrication systems
  LO 3 Understand bearing operations, types, materials and causes of failure
  LO 4 Understand power transmissions, principles of operation and failure patterns
  LO 5 Understand seals and sealing principles
  LO 6 Understand and use dismantling and re-assembly techniques
  
  Please click on a book to read
- Ten Basic Rules of Netiquette or Internet Etiquette URL
  
  Important: - Please Read!
  
  Please follow the link to the Ten Basic Rules of Netiquette or Internet Etiquette. Please read this as it is very important to follow the basic rules whilst commenting on a forum.
- Project Summary Assignment
  
  UPLOAD your project summary/ initial ideas here. It is important that you get some ideas down as soon as possible, fill in the summary sheet and upload it here before 22nd November. This is so we can address any problems together.
- Project Summary File
  
  Project summary proforma. Download this file and answer the short questions. This will help you get your project started.
- Staff and Contact Details
  Unit 029 will be delivered by Ian Griffiths
  
  Email is ian.griffiths@nptcgroup.ac.uk
  
  Teams Phone Number is 0330 818 8345
  
  Ian Griffiths will be contactable during 9am to 4:30pm Mon to Friday
- Announcements Forum

29.6 Practical Assessment Job Reports and Help

29.6 Practical Assessment Job Reports and Help

This section includes details of the practical activities, guideline notes and also useful video links to complete the written tasks.
- Usefull Industrial Images to help YOU! Add your own too! Lightbox Gallery
- MIG 101 to MIG 108 Job Report Templates Folder
  
  Please find the job report templates for :
  
  1. MIG 101 Alignment Rig
  2. MIG 102 Dismantling and Reassembly of a Compressor
  3. MIG 103 Power Transmission Rig
  4. MIG 104 Strip and Rebuild of a Hydraulic Cylinder
  5. MIG 105 Dismantling and Reassembly of a Split ‘Cooper’ Bearing
  OR
  6. MIG 106 Dismantling and Reassembly of a Split ‘Cooper’ Bearing with Housing
  7. MIG 108 Strip and Rebuild of a Plummer Block
- Reciprocating Compressors URL
  
  Here is a link to the Bright Hub Engineering website, and information on reciprocating compressors. You made need to follow a few links but there is a lot of good information here.
- Compressor Exploded Diagram File
  
  Here you will find a PowerPoint showing the different parts of the compressor in the form of an exploded diagram.
- Video 2:
  Here is a video on V belt drive alignment and tensioning.
- Cooper Bearing Notes File
  
  Here are some useful notes on the Cooper bearing activity.
- Video 3:
  
  A short video on how a diaphragm pump works.
- Plummer Block Notes File
  
  Here you will find some useful information on the bearing type used for the Plummer block assessment.
- Diaphragm Pump Manual File
  
  PDF manual on how to maintain and strip a diaphragm pump. This document includes performance curves to help you select the correct pump for a given duty.
- Here is a simple video on explaining how bearings work.
- Here is a video on how to use a piston compression tool.
- Diaphragm Pump Notes on Advantages and Disadvantages File
  
  Here is a word document containing information on some common bearing types that you may find useful.
- Bearing Types File
  
  Here is a word document containing information on some common bearing types that you may find useful.
- Torque Setting Chart File
  
  Here is a torque setting sheet that gives you the torque values needed to tighten the nuts/bolts to their correct setting when using a torque wrench.

EAL Level 3 QET3/029 Maintenance of mechanical systems 23-24

Section: 29.6 Practical Assessment Job Reports and Help | EAL Level 3 QET3/029 Maintenance of mechanical systems 23-24 | Grŵp NPTC Group Moodle

GENERAL COURSE INFORMATION

This section contains useful information for the unit and covers six learning outcomes:

LO 1 Understand the maintenance function

Staff and Contact Details

Unit 029 will be delivered by Ian Griffiths

Email is ian.griffiths@nptcgroup.ac.uk

Teams Phone Number is 0330 818 8345

Ian Griffiths will be contactable during 9am to 4:30pm Mon to Friday

29.6 Practical Assessment Job Reports and Help

29.6 Practical Assessment Job Reports and Help

This section includes details of the practical activities, guideline notes and also useful video links to complete the written tasks.

Please find the job report templates for :

1. MIG 101 Alignment Rig

2. MIG 102 Dismantling and Reassembly of a Compressor

3. MIG 103 Power Transmission Rig

4. MIG 104 Strip and Rebuild of a Hydraulic Cylinder

5. MIG 105 Dismantling and Reassembly of a Split ‘Cooper’ Bearing

OR

6. MIG 106 Dismantling and Reassembly of a Split ‘Cooper’ Bearing with Housing

7. MIG 108 Strip and Rebuild of a Plummer Block

Here is a link to the Bright Hub Engineering website, and information on reciprocating compressors. You made need to follow a few links but there is a lot of good information here.

Here you will find a PowerPoint showing the different parts of the compressor in the form of an exploded diagram.

Video 2:

Here is a video on V belt drive alignment and tensioning.

Here are some useful notes on the Cooper bearing activity.

Video 3:

A short video on how a diaphragm pump works.

Here you will find some useful information on the bearing type used for the Plummer block assessment.

PDF manual on how to maintain and strip a diaphragm pump. This document includes performance curves to help you select the correct pump for a given duty.

Here is a simple video on explaining how bearings work.

Here is a video on how to use a piston compression tool.

Here is a word document containing information on some common bearing types that you may find useful.

Here is a word document containing information on some common bearing types that you may find useful.

Here is a torque setting sheet that gives you the torque values needed to tighten the nuts/bolts to their correct setting when using a torque wrench.