Section: Week 4&5: LO 1 Understand the maintenance function | EAL Level 3 QET3/029 Maintenance of mechanical systems 23-24

Section: Week 4&5: LO 1 Understand the maintenance function | EAL Level 3 QET3/029 Maintenance of mechanical systems 23-24 | Grŵp NPTC Group Moodle

Main course page

GENERAL COURSE INFORMATION

Here you will find documents and information regarding the course overall.
- QET3/029 Maintenance of Mechanical Systems
  
  This section contains useful information for the unit and covers six learning outcomes:
  
  LO 1 Understand the maintenance function
  LO 2 Understand lubricants and lubrication systems
  LO 3 Understand bearing operations, types, materials and causes of failure
  LO 4 Understand power transmissions, principles of operation and failure patterns
  LO 5 Understand seals and sealing principles
  LO 6 Understand and use dismantling and re-assembly techniques
  
  Please click on a book to read
- Ten Basic Rules of Netiquette or Internet Etiquette URL
  
  Important: - Please Read!
  
  Please follow the link to the Ten Basic Rules of Netiquette or Internet Etiquette. Please read this as it is very important to follow the basic rules whilst commenting on a forum.
- Project Summary Assignment
  
  UPLOAD your project summary/ initial ideas here. It is important that you get some ideas down as soon as possible, fill in the summary sheet and upload it here before 22nd November. This is so we can address any problems together.
- Project Summary File
  
  Project summary proforma. Download this file and answer the short questions. This will help you get your project started.
- Staff and Contact Details
  Unit 029 will be delivered by Ian Griffiths
  
  Email is ian.griffiths@nptcgroup.ac.uk
  
  Teams Phone Number is 0330 818 8345
  
  Ian Griffiths will be contactable during 9am to 4:30pm Mon to Friday
- Announcements Forum

Week 4&5: LO 1 Understand the maintenance function

Week 4&5: LO 1 Understand the maintenance function
- 29.1 Learning outcome Understand the maintenance function
  Lesson Objectives:
  To discover the use of condition monitoring methods
- Activity 1:
  
  Please read through the PP on condition monitoring methods and watch the videos contained within it.
- Condition Monitoring PowerPoint File
  
  Please read through the Condition Monitoring PowerPoint and watch the videos contained within it.
- Activity 2:
  
  Please watch the video on Vibration analysis and then read through the document on using vibration analysis to detect bearing failures.
- Vibration Analysis Video:
  Please watch the video below on vibration analysis.
- Bearing Faults Description. File
  
  Useful document indicating the types of bearing fault that can be detected using vibration monitoring. Good description of each type of bearing fault.
- Activity 3:
  
  Please watch the video on thermal imaging. There are notes here summarising the different types of conditioning monitoring methods.
- Thermal Imaging Video
- Condition Moinitoring Techniques File
  
  Here is a Word document summarising the main techniques used in condition monitoring and highlighting, their pros and cons.
- Condition Monitoring is Not Enough File
  
  Paper from the Maintenance and Engineering Journal describing how maintenance strategies should be combined to get the best outcome from any equipment.
- Activity 4:
  
  Please complete 29.1B Conditioning Monitoring by using the resources contained within this section and then upload to the document to the upload point.
- Activity 29.1B Condition Monitoring Assignment
  
  Please complete the activity. These answers will form part of your assessment for this module. Think carefully about your answers.

EAL Level 3 QET3/029 Maintenance of mechanical systems 23-24

Section: Week 4&5: LO 1 Understand the maintenance function | EAL Level 3 QET3/029 Maintenance of mechanical systems 23-24 | Grŵp NPTC Group Moodle

GENERAL COURSE INFORMATION

This section contains useful information for the unit and covers six learning outcomes:

LO 1 Understand the maintenance function

Staff and Contact Details

Unit 029 will be delivered by Ian Griffiths

Email is ian.griffiths@nptcgroup.ac.uk

Teams Phone Number is 0330 818 8345

Ian Griffiths will be contactable during 9am to 4:30pm Mon to Friday

Week 4&5: LO 1 Understand the maintenance function

Week 4&5: LO 1 Understand the maintenance function

29.1 Learning outcome Understand the maintenance function

Lesson Objectives:

To discover the use of condition monitoring methods

Activity 1:

Please read through the PP on condition monitoring methods and watch the videos contained within it.

Please read through the Condition Monitoring PowerPoint and watch the videos contained within it.

Activity 2:

Please watch the video on Vibration analysis and then read through the document on using vibration analysis to detect bearing failures.

Vibration Analysis Video:

Please watch the video below on vibration analysis.

Useful document indicating the types of bearing fault that can be detected using vibration monitoring. Good description of each type of bearing fault.

Activity 3:

Please watch the video on thermal imaging. There are notes here summarising the different types of conditioning monitoring methods.

Thermal Imaging Video

Here is a Word document summarising the main techniques used in condition monitoring and highlighting, their pros and cons.

Paper from the Maintenance and Engineering Journal describing how maintenance strategies should be combined to get the best outcome from any equipment.

Activity 4:

Please complete 29.1B Conditioning Monitoring by using the resources contained within this section and then upload to the document to the upload point.

Please complete the activity. These answers will form part of your assessment for this module. Think carefully about your answers.